CNC parts processing factory!
It's not that you can't maintain the machine tool, but you don't use the right method!
In the CNC parts processing factory because of the lack of maintenance of the machine tool is not a few, so we have to pay attention to the maintenance of CNC machining machine tools.
The maintenance of CNC machining machine tools is divided into daily inspection, weekly inspection, monthly inspection, quarterly inspection and semi-annual inspection.
Daily inspection of CNC parts processing manufacturers: the main items include hydraulic system, spindle lubrication system, guide rail replacement system, cooling system and air pressure system.
Daily inspection is to detect according to the normal conditions of the system, for example, to check whether the coolant in the coolant tank is sufficient and not enough to be added in time.
Weekly inspection: its main items include machine tool parts and spindle lubrication system, which should be checked correctly every week, especially for machine tool parts to remove iron filings and external debris cleaning.
Monthly inspection: mainly to check the power supply and air dryer, x, y, z three-axis track lubrication.
The rated voltage of the power supply voltage under normal conditions is 180v ~ 220 v, frequency 50 hz, if there is any abnormality, it should be measured and adjusted.
The air dryer should be removed once a month and then cleaned and assembled. The three-axis rail surface must be well lubricated.
Quarterly inspection: mainly from three aspects of machine tool bed, hydraulic system and spindle lubrication system.
For example, when checking the machine tool bed, it mainly depends on whether the accuracy and level of the machine tool meet the requirements in the manual. If there is any problem, contact the mechanic immediately.
When checking the hydraulic system and the spindle lubrication system, if there is any problem, replace the new oil respectively and clean it.
Half-year inspection: after half a year, CNC parts processing manufacturers should check whether all keys are sensitive and normal, the hydraulic system of the machine tool, the spindle lubrication system and the x-axis. If there is any problem, new oil should be replaced, and clean.
On the premise of reasonable use, CNC parts processing manufacturers should attach importance to the maintenance of CNC machine tools, increase capital investment in maintenance, and do a good job in the maintenance of CNC machine tools, improve the service life of CNC machine tools and ensure the normal use of CNC machine tools.
I am Cindy Fan,you please kindly send your inquriy to firstname.lastname@example.org ,I will send you quotation with 2 hours, or contact me at Skype Cindy-fan, Wechat 86-13813884518, and Whatsapp 86-13813884518,thank you!
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.